OPI Gelcolor Application & Removal Instructions
1. Prep the nails and shake each bottle before use. Polish on base coat. Seal the free edges and cure for 30 seconds.
2. Polish on GelColor. Seal free edges and cure for 30 seconds. Then apply a second thin coat, cap free edges, and cure for 30 seconds.
3. Polish on Top Coat, seal the free edges, and cure for 30 seconds.
4 Remove sticky/tacky film left on the nail with a lint free pad soaked in dsperse Inhibition layer remover.
OPI Removal Instructions .
OPI can easily be removed using OPI Expert Touch Remover or dsperse Inhibition layer remover.
1 Wrap each nail with a removal wrap saturated with OPI Expert Touch Remover or Dsperse Inhibition layer remover.
2 Secure wrap tightly.
3 Leave for 10 minutes and apply pressure to the nail.
4 After 10 minutes, remove the wrap from each finger.
5 Gently push the GelColor off of the nail.
6. Use pure acetone and a lint free pad to remove any leftover residue.
2. Polish on GelColor. Seal free edges and cure for 30 seconds. Then apply a second thin coat, cap free edges, and cure for 30 seconds.
3. Polish on Top Coat, seal the free edges, and cure for 30 seconds.
4 Remove sticky/tacky film left on the nail with a lint free pad soaked in dsperse Inhibition layer remover.
OPI Removal Instructions .
OPI can easily be removed using OPI Expert Touch Remover or dsperse Inhibition layer remover.
1 Wrap each nail with a removal wrap saturated with OPI Expert Touch Remover or Dsperse Inhibition layer remover.
2 Secure wrap tightly.
3 Leave for 10 minutes and apply pressure to the nail.
4 After 10 minutes, remove the wrap from each finger.
5 Gently push the GelColor off of the nail.
6. Use pure acetone and a lint free pad to remove any leftover residue.
